How to use stick pins for insulation?

Stick pins are self-adhesive insulation stick pins or perforated base insulation stick pins, both are with a 50mmx50mm square metal base, then a pin through the centre and combine tightly. The material always are stainless steel or mild steel, and the pin diameter is 12GA(2.7mm) as standard, the length is available from 19mm-250mm for different application.

The difference betweent them is: self-adhesive stick pins have a foam adhesive covered with a release paper on the meatl base for quickly and easily using,just peel off the release paper to stick ; and the perforated base stick pins have 44 holes in the metal base for spread the adhesive when application, and need you prepare the adhesive by yourself.

Steps for Self-adhesive insulation stick pins

    • 1.Clean the surface where need to install inuslation, the self-adhesive stick pins request straight, smooth, clean and dry surface to application.
    • 2.Simple peel off the release paper at the back of the foam adhesive on the stick pins.
    • 3.Stick pins to the surface where the insulation material will be installed.
    • 4.Install the insulation,stick pins pierce the insulation material and hold the material on it.
    • 5.Secure the insulation material with our self-locking washers onto each stick pins
    • 6.Add our dome cap or bend over the pin to avoid it impaling someone.
    • 7.The insulation is now hanging firmly.

    Steps for Perforated base insulation stick pins

    • 1.Clean the surface where need to install inuslation, the perforated base stick pins request straight, smooth, clean and dry surface to application.
    • 2.Apply the adhesive evenly on the perforated base of the stick pins,and waiting for the adhesive is dry and tight.
    • 3.Stick and press pins onto the surface where the insulation will be installed.
    • 4.Stick pins pierce the insulation material and hold the insulation on it.
    • 5.Secure the insulation material with our self-locking washers onto each pins.
    • 6.Add our dome cap or bend over the pin to avoid it impaling someone.
    • 7.The insulation is now hanging firmly.

    How many stick pins per m2?

    The stick pins quantity per m2 depends on the weight of your insulation, generally request a minimum of 6 pins per m2, and should be distributed evenly.

    Please write to us if any question or requirement.